Honda hs50 manual

Maximum snow-blowing distance is nearly 40 feet, and snow-clearing capacity is more than 20 tons per hour. For safe operation do not allow children to operate the HS50, and keep children and pets away from the area of operation. Before use, inspect the area to be cleared of snow for unseen obstacles. Never clear snow from gravel surfaces as the HS50 will pick up loose rocks and fling them about.

Do not use the HS50 in conditions of poor visibility or at night under poor lighting. Inspect the HS50 before each use. Adjust the discharge chute so that snow does not strike bystanders, passersby, and vehicles. Keep away from the discharge opening, and turn the engine off before unclogging the discharge guide.

During operation, hold the handles firmly and operate the machine at a constant pace. If there is a need to stop quickly due to a pet or a child, immediately release both auger and drive clutch levers to disengage the snow-blowing and drive mechanisms to stop all external moving parts safely.

If the machine hits an obstacle such as a rock, stop the engine at once, check for damage, and do not resume operation before repairing any damage found. Exhaust gas contains toxic carbon monoxide, so the engine never should run indoors without adequate ventilation. Refueling should be in a well-ventilated area with the engine off. Turning the switch fully clockwise starts the HS Turning the fuel valve handle in the middle of the console to the left of the engine switch fully counter-clockwise opens the fuel line from the tank to the carburetor; turning it fully clockwise cuts off the power.

When transporting the snowblower, turn the Fuel valve OFF and keep the snow- blower level to prevent fuel spillage. Page 7: Component Identification And Function 2. NOTE: When both levers are squeezed, the drive clutch lever locks the auger clutch lever down. Page Height Adjustment Pedal 2. Raise or lower the machine to the desired position and release the pedal.

Page Pre-Operation Check 3. Check the fuel level. If the level is low, fill to the top of the oil filler neck with the recommended oil. Turn the engine switch to the ON position. Engine switch 2. Turn the fuel valve to the ON position. Fuel valve Page 19 3.

Pull the starter grip lightly until you feel resistance, then pull briskly. Otherwise, the starting mechanism might be damaged. Page 20 5. Let the engine warm up for several minutes. Page Snowblower Operation 5. Raise the throttle lever p. Move the shift lever p. Page 22 NOTE: To move the machine without engaging the snow blowing mechanism, squeeze the drive clutch lever only. Do this when moving the machine to or from the area to be cleared. To engage the snowblowing mechanism without using the drive mechanism, squeeze the auger clutch lever only.

Page Stopping The Engine 6. Turn the engine switch to the OFF position. Turn the fuel valve to the OFF position. Page Maintenance l 7. Inspect or service as scheduled in the table on the next page.

Shut off the engine before performing inspection and maintenance, and remove the spark plug wire from the plug so the engine cannot be started. If the engine must be run, make sure the area is well ventilated. Remove the drain plug and filler cap, and drain the oil. Retighten the plug securely. Remove the spark plug cap. Not Specified 39 Items Honda 39 Items Not Specified 4 Items 4. Power Source. Gasoline 18 Items Not Specified 21 Items New Items Used 61 Items Please provide a valid price range.

Buying Format. All Listings. Accepts Offers. Buy It Now. Item Location. Canada Only. North America. Shipping Options. Free International Shipping. Local Pickup.